Pulse Jets

Clyde Pulse Jet filters can be used in a wide variety of air filtration applications. Depending on the configuration, they can be used as the filter in a dust collection system or as the product receiver in a pneumatic conveying system. Filters can also be equipped with a HEPA high efficiency filter on the clean air exhaust where the air is being reintroduced into the work environment.

Contact Clyde for all of your industrial filtration needs or alternatively download the Pulse Jet Dust Filter Brochure

Reliable Filtration
A full line of pulse jet filters is available. All models feature the same compressed air cleaning technology, reliable components and quality construction. Each model includes factory assembly and pre-wiring of the timer board and solenoid valves to ensure proper installation and operation.

SEntry Pulse Jet Filter 

The Side Entry horizontal cartridge filter is designed for low headroom applications.  Side Entry provides easy maintenance and accessibility with no concerns about confined space entry and eliminating the need for a ladder and/or safety cage.  The rectangular envelope style cartridge design minimizes product retention on the filter cartridge.  Wide pleat arrangement allows for high air-to-cloth ratios.  The SEntry can be explosion vented through the roof without increasing the cross sectional area of the filter can.

Clyde SEntry Pulse Jet Filter

AVS filters (Air Vent Square) are bottom removal (below the tube sheet) filters. Without the hopper on the housing (Style II), the filter is ideally suited as a bin vent filter for storage tanks, work bins and surge hoppers. With the hopper (Style III), the filter can receive the dust through a hopper entry inlet and discharge the collected dust through an airlock for dust disposal or recycling.

AVR filters (Air Vent Round) are bottom removal (below the tube sheet) filters. Without the hopper on the housing (Style II), the filter is ideally suited as a bin vent filter for storage tanks, work bins and surge hoppers. With the hopper (Style III), the filter can receive the dust through a hopper entry inlet and discharge the collected dust through an airlock for dust disposal or recycling. The filter can also be configured with a pneumatic receiver section and receive product from a vacuum or pressure convey system.

ST filters (Square-housing Top-removal) are counterparts to the AVS filter. Filter media is installed and removed through the clean air plenum of the filter. On larger sizes, the plenum can be designed as a walk-in plenum so that filter media replacement and maintenance can occur in an enclosure. On smaller sizes, or when the option of a walk-in plenum is not selected, hinged doors on top of the plenum provide access to the filter media.

LST filters (Large Square-housing Top-removal) are counterparts to the ST filter. Filter media is installed and removed through the clean air plenum of the filter. The plenum can be designed to be a walk-in plenum so that filter media replacement and maintenance can occur in an enclosure. When the option of a walk-in plenum is not selected, hinged doors on top of the plenum provide access to the filter media.

RT filters (Round-housing Top-removal) are counterparts to the AVR filters. Filter media is installed and removed through the topside, or clean air plenum of the filter. On larger sizes, the plenum can be designed as a walk-in plenum so that filter media replacement and maintenance can occur in an enclosure. On smaller sizes, or when the option of a walk-in plenum is not selected, hinged doors on top of the plenum are provided for access to the filter media.